Setting up your TV
7
AV-32/28EX5BK / LCT1821-001A-U / ENGLISH
To view the pay-per-view of the
Digital Terrestrial broadcasting
It is required to subscribe to a pay-per-view
company to view the pay-per-views of the
Digital Terrestrial broadcasting.
Obtain the Conditional Access Module
(CAM) and the Viewing card by subscribing
to a pay-per-view company, then insert those
to the Television using the following
procedure.
1 Switch off the TV and unplug from
the mains.
2 Insert the Viewing Card to the CAM.
• The Viewing Card should be inserted
straight into the slot.
3 Insert the CAM to the slot of the TV.
• The CAM should be correctly inserted,
it is impossible to insert fully if
reversed. The CAM or the TV terminal
may be damaged if the CAM is
forcefully inserted.
4 Connect the TV to the mains
supply, switch on, and then wait for
few moments until the card is
activated.
• Some CAMs may require the following
set up.
Please set the CAM by entering the
DTV menu, Common Interface then
pressing
a
button. (CAM set up
menu is not displayed when it is not
required.)
• To see the viewing contract
information, press
H
, Select
DTV and Press
a
, then Select
Common Interface and press
a
.
Connecting the power cord to
the AC outlet
Insert the AC plug on the power cord from
the TV into an AC outlet.
Caution
• Operate only from the power source specified
(AC 220 – 240 V, 50 Hz) on the unit.
Putting the batteries into the
remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the
-
end, making
sure the
+
and
-
polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on how much you use the
remote control.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as you need to.
• If the remote control does not work
properly, replace the batteries.
AV-32&28EX5BK_Eng.book Page 7 Wednesday, April 13, 2005 5:51 PM
