JVC AV 27260 User Manual Download Page 42

Page: 42 / 52

Button Functions

The R

ETURN

+ button has two functions:

Return

Returns to the channel viewed just before the channel currently onscreen.

Lets you program a specific channel to return to while scanning through the channels

using the CH+ and CH- buttons.

ETURN

+ and hold for three seconds

The channel currently active has been programmed as your channel. Now scan through

the channels using the C

HANNEL

+/- buttons

ETURN

You will return to your programmed channel.

• To cancel your channel, press and hold the R

ETURN

+ button for three seconds. The message

“RETURN CHANNEL CANCELLED!” will appear.
• works only with the C

HANNEL

+/- buttons. Pressing any number key will cancel .

• does not affect the PIP channel (AV-27260, AV-32260 and AV-36260 only).

Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124,
p, then 2 (two), then 4 (four).

RETURN CHANNEL

PROGRAMMED !

100+ Button

Input

Selects the signal input source for the television: TV, for Antenna or Cable; Video 1, 2 or 3, for video
devices like VCRs, DVD players, or camcorders.

NPUT

VIDEO-1

VIDEO-2

VIDEO-3

Summary of Contents for AV 27260





















































Search results

Summary of Contents for AV 27260

Reviews:

Related manuals for AV 27260

Brands by name

Popular brands

JVC AV 27260, User Manual

Search results

Summary of Contents for AV 27260

Reviews:

Related manuals for AV 27260

Brands by name

Popular brands