V-Chip
33
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set
with a Lock Code of "0000". You may change the code to any four-digit number you wish. To
change the Lock Code, follow the steps below.
Press the M
ENU
button
❷
To SET LOCK CODE
➛❿
To operate
The lock icon appears
Press Z
ERO
to access the Lock Code
The first digit will be highlighted
➛❿
To select the number
❷
To move to the next digit
Continue to follow these directions for all four numbers
❷
To FINISH
➛❿
To save settings and exit
Your Lock Code is now set.
LOCK CODE
0 0 0 0
FINISH
0
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
NOTES:
