■
■
■
■
1
Connect the TV’s VIDEO jack and the de-
vice’s VIDEO OUT (video output) jack with
a video cable.
If connecting a device to the TV with an S-VID-
EO cable:
Connect the VCR’s S-VIDEO OUT (S-VIDEO output)
connector and the TV’s S connector with an S-VIDEO
cable, instead of connecting with a video cable.
Note that the connection with a video cable will be ig-
nored in case you connect a VCR to the TV with both vid-
eo cable and S-VIDEO cable.
If connecting a DVD player to the TV with a
component video cable:
Connect three jacks (Y/VIDEO, C
B
and C
R
) in the VID-
EO-3 terminal and the DVD player’s COMPONENT
(composite video output) jacks with a component video
cable, instead of connection with a video cable. Then set
the VIDEO-3 SETTING to COMPONENT, according to
“VIDEO-3 SETTING” on page 22.
If connecting a device to the VIDEO-3/COMPO-
NENT terminal with a video cable:
Connect the TV’s Y/VIDEO jack and the device’s VIDEO
OUT (video output) jack with a video cable. Then set the
VIDEO-3 SETTING to VIDEO according to “VIDEO-3
SETTING” on page 22.
Note:
•
In the VIDEO-4 terminal, the VIDEO jack is indicated
by V.
2
Connect the TV’s AUDIO jacks (L/MONO
and R) and the device’s AUDIO OUT (audio
L/R output) jacks with an audio cable.
If the device’s sound output is in mono:
Connect the device’s AUDIO OUT jack and the TV’s L/
MONO jack with an audio cable.
Note:
•
In the VIDEO-4 terminal, the AUDIO jacks are indi-
cated by L/MONO and R.
If the device has an AV COMPU LINK terminal:
If you connect the TV’s AV COMPU LINK terminal and the de-
vice’s AV COMPU LINK terminal with an AV COMPU LINK
cable, you can use the AV COMPU LINK remote control sys-
tem. For details, see “AV COMPU LINK” on page 8.
■
■
■
■
!!!!
%
%
%
%&
&
&
&&
&
&
&
The signals of the image and sound you are currently viewing
with this TV are output through the OUTPUT terminal. By con-
necting a VCR to the OUTPUT terminal, you can record the
currently shown image and sound to that VCR. To do this,
connect the VCR and OUTPUT terminal following the steps
below.
1
Connect the VIDEO jack in the OUTPUT
terminal and the VCR’s VIDEO IN (video in-
put) jack with a video cable.
2
Connect the AUDIO jacks (L and R) in the
OUTPUT terminal and the VCR’s AUDIO IN
(audio L/R input) jacks with an audio cable.
Note:
•
When you turn off the TV, the signals from the OUTPUT
terminal are also turned off.
•
The component signals input from the VIDEO-3/COMPO-
NENT terminal cannot be output through the OUTPUT ter-
minal.
■
■
■
■
+
+
+
+
Connect the headphones with a stereo mini
jack (of 3.5 mm in diameter) to the Headphone
jack at the TV front panel.
Note:
•
When you connect the headphones, the TV speakers is-
sue no sound.
