JVC AV-20NX3, Instructions Manual

Page: 7 / 112

7
Basic operation
• The illustration below is for the remote control
RM-C1010. Depending on the applicable mod-
els, the remote controls may not look exactly
the same.
MUTING
OFF
TIMER
ECO
SENSOR
PICTURE
MODE
CHANNEL
SCAN
REVEAL
SUBPAGE CANCEL
TV
TEXT
HOLD
RM-C1010
INDEX
STORE MODE
SIZE
SYSTEM
COLOUR SOUND
MENU
CHANNEL
POWER
DISPLAY
Ι
/
ΙΙ
TV/TEXT
TV/VIDEO
VOLUME
1 2 3
4 5 6
7 8 9
0
-/--
CINEMA
SURROUND
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the Main
power button on the TV then press the
POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
- the CHANNEL
m
button
- the Number buttons
- the TV/VIDEO button
2 Select a channel.
■
Press the CHANNEL
m
button.
• Up/down selection cannot be selected for
channels to which the SKIP has been set
to “
YES ”. See page 19.
■
Press the Number buttons to enter
the channel number.
• If you want to enter a two-digit number,
press the -/-- button to select the two digit
mode “--”, then enter the channel num-
ber.
3 Press the VOLUME
M
button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your TV
for a long time or if you wish to save energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 8.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 14.
LCT1170-001A-H 8/6/2002, 14:37 7