JVC ABT22 - Radio / CD, Instructions Manual

Page: 15 / 153

ENGLISH
15 OPERATIONS
Continued on the next page
You can set the unit to connect the Bluetooth device
automatically when the unit is turned on. (See
“
Auto Cnnct ” on page 36.)
Disconnecting a device
Perform steps 1 and 2 on page 13, then...
Select “Discn Phone” or “Discn Audio.”
“Disconnecting...” flashes, then “Disconnected (and
device name)” appears on the display when the device
is disconnected.
Using the Bluetooth cellular
phone
Making a call
You can make hands-free calls using the unit.
The sounds comes out from the connected speakers.
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
1
2
Select “Call.”
3
Select the method to make a call.
• Dialed * : Shows the list of the phone numbers
you have dialed. Go to the following step.
• Received * : Shows the list of the received calls.
Go to the following step.
• Phonebook : Shows the name/phone number of
the phone book of the unit. Go to the following
step. To copy the phone book memory, see page
17.
• Preset : Shows the list of preset numbers. Go to
the following step. To preset numbers, see page
17.
• Dial Number : Shows the phone number entry
screen. See “How to enter phone number” on
page 16.
• Voice Dial (Only accessible when the connected
cellular phone has the voice recognition system):
Speak the name (registered words) you want to
call.
* Displays only when the dialed or received number
is made through the unit.
4
Select the name/phone number/preset
number you want to call.
• When the sound is stopped or interrupted during the
use of a Bluetooth device, turn off, then turn on the
unit.
– If the sound is not yet restored, connect the device
again. (See “Connecting a registered device” on
page 14.)
The built-in microphone is
behind this corner of the unit.
EN08-17_KD-ABT22[J]f.indd 15 EN08-17_KD-ABT22[J]f.indd 15 1/2/08 9:51:19 AM 1/2/08 9:51:19 AM