Quick Setup Connections
Connections
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may have.
After you are finished connecting your devices, plug the power cord into the nearest power
outlet and turn on the TV.
13
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Diagram #2
Do you use a Cable TV Box?
Do you have a VCR?
Do you have a VCR?
Diagram #1
Diagram #3
Diagram #1
Yes
No
Yes
No
Yes
No
Remove the terminal cover
There are connection terminals behind the covers on the left
and right in the back of the TV. Remove these two covers
before connecting an antenna or other devices. The covers
can be removed by removing the hook at the bottom and
then pull out while slightly lifting. To replace the covers, first
connect the hook at the top of the cover, and then insert the
hook at the bottom.
Note:
• Leave the terminal covers off if they do not fit properly. Do
not force to replace the covers. Doing so may damage the
connection cables and covers.
Step 3 - Connecting your devices
LT-26WX84 Eng (with stand) 13
12/11/03, 10:00:50 AM
