12
Å
ı
Î
Ç
DVR/DVD
IN
FRONT
DVD
MULTI IN
CENTER
SUBWOOFER
SURR-L
SURR-R
When you connect a DVD recorder or DVD player with its analogue discrete output jacks (DVD MULTI IN):
If your DVD recorder or DVD player has analogue 5.1 channel output jacks, use the connection below. When a DVD Audio disc is played
back, the original high-quality sounds can be reproduced by using this connection.
For video connection, see page 11.
Turn off all components before making
connections.
Stereo audio cable (not supplied)
Monaural audio cable
(not supplied)
Monaural audio cable
(not supplied)
Stereo audio cable
(not supplied)
DVD recorder or
DVD player
White
Red
White
Red
When you enjoy sound recorded in DVD-Audio...
You can enjoy sound recorded in DVD-Audio both with analogue or digital methods.
–
With analogue method:
• connect your DVD recorder or DVD player to this receiver according to the diagram above.
• select “A MULTI” in the audio input setting. (See page 20.)
–
With digital method:
• connect your DVD recorder or DVD player and TV to this receiver with the HDMI cables. (See page 11.)
• select “HDMI” in the audio input setting. (See page 20.)
NOTES
• When selecting “A MULTI” in the audio input setting or when multi channel PCM signals (see page 47) are coming in with selecting
“HDMI” in the audio input setting, you can listen to the front channel sounds (left and right) only by using the headphones. 3D
HEADPHONE mode (see page 48) is not available.
• When selecting “A MULTI” in the audio input setting or when multi channel PCM signals (see page 47) are coming in with selecting
“HDMI” in the audio input setting, the following items are not available:
– DECODE MODE (see page 21)
– CC Converter (see page 22)
– EX/ES/PLllx (see page 30)
– DUAL MONO (see page 30)
– SUBWFR OUT (see page 30)
– CROSSOVER (see page 31)
– LFE ATT (see page 31)
– MIDNIGHT (see page 31)
– AUDIO DELAY (see page 32)
– DIGITAL EQ 63Hz/250Hz/1kHz/4kHz/16kHz (see page 38)
– BASS BOOST (see page 38)
– INPUT ATT (see page 38)
– Sound parameters for Surround/DSP modes (see pages 38 and 39)
– Surround/DSP modes (see pages 46 to 50)
• When you enjoy sound recorded in DVD-Audio through the HDMI connection, use a DVD recorder or DVD player compatible with
HDMI version 1.1.
Å
To left/right surround channel audio output
ı
To center channel audio output
Ç
To left/right front channel audio output
Î
To subwoofer output
NOTE
Do not connect different components to the DVD MULTI IN jacks
and AV IN/OUT (SCART) DVR/DVD terminal (see page 11);
otherwise, sounds from both components come out of the
speakers at the same time.
Do not connect the AC power plug to the wall outlet until all connections are completed.
: signal current
09-15RX-D701S[B]_f.p65
05.11.7, 2:54 PM
12
