Starting the automatic station search again
• Press the
<MENU>
button to retrieve the DAB menu.
“
FULL SCAN
” will show on the display. Start the search with the
<OK>
button.
• During the search the display will show the number of stations found so far.
• If no stations are found during the search, then
“NO DAB”
will be displayed for approx.
2 seconds
and then change to the display
“FULL SCAN”
.
Please then check that the antenna is connected correctly or try to find a different position for the
device to achieve a better reception.
Manual tuning of ensembles
• Press the
<MENU>
button to retrieve the DAB menu.
• Press the
<TRACK SKIP FORWARD>
button until
“MANUAL”
shows in the display.
• Using the
<OK>
button, the function is confirmed and the display will show the station which is
currently set with the corresponding frequency.
• Press the
<TRACK SKIP FORWARD>
or
<TRACK SKIP BACKWARD>
buttons to manually select
another channel.
• Confirm selection using the
<OK>
button. Then the signal level will be shown in the display,
another press of the button will load the current ensemble.
Selecting a DAB+ station
The stations saved alphabetically in the stations list can be retrieved as follows:
• Press the
<TRACK SKIP FORWARD>
or
<TRACK SKIP BACKWARD>
buttons on the remote
control or the main unit to scroll backwards or forwards in the stations list.
• When you have selected the desired station, press the
<OK>
button on the remote control or
wait 2 seconds for the playback to start.
“LOADING”
followed by
“PLAYING”
appears in the
display.
• If the reception level for the selected station is not sufficient for trouble-free playback,
then
”OFF AIR”
will appear in the display. Please then select a different station.
Saving stations in station memory
There are 30 memory spaces available to make it easier to find DAB stations. To assign the memory,
proceed as follows:
• Select a station to be saved.
• Press and hold the
<PROG>
button until the display flashes and shows a memory space. An empty
memory space is indicated by
“EMPTY”
, an assigned space is shown with its station name. You can
also re-assign a memory space which is already in use.
• Press the
<TRACK SKIP FORWARD>
or
<TRACK SKIP BACKWARD>
buttons to select a memory
space.
• Confirm save using the
<OK>
button.
“STORED”
flashes briefly on the display.
• The stored stations can be recalled as follows:
Press the numeric buttons on the remote control to enter the number of the memory location
directly. Complete the entry by pressing the
<OK>
button. Alternatively, you can use the
<PROG>
key followed by
<TRACK SKIP FORWARD>
or
<TRACK SKIP BACKWARD>
to select.
13
