35
www.juwent.com.pl
16. CONTROL MEASUREMENTS
After having completed maintenance inspections and works, check and adjust functional parameters
of the device in accordance with recommendations in “Start-up and adjustment”. Any conducted
maintenance and control measurements must be recorded in Inspection and Maintenance Chart.
17. DISPOSAL
The device should be disposed of by a company specialized in dismantling and disposal of such
devices.
18. OHS INSTRUCTIONS
Connection and start-up of the units should be carried out by qualified personnel in
conditions compliant with valid regulations, particularly in use of electrical equipment.
Do not power the system before connecting the unit to protective system.
Do not carry out any repairs and maintenance without having previously turned off the
unit power supply.
Do not operate the unit with removed inspection panel from any unit section.
Person in charge of operation, repair or maintenance must be properly qualified and
authorised in accordance with regulations valid in a country of the device installation.
Location of the unit installation must be equipped with the required protective
equipment providing safe operation and necessary fire protection equipment in
accordance with local provisions
Despite the fact that the device has been designed and manufactured in accordance with the
standards valid as for the moment of the manufacture start, injury and damage to health when
using the device is likely. This likeliness is related to frequency of accessing the device when using,
cleaning and repairing it, presence of people within the danger area, and failure to respect the
safety rules as set out in the instruction. Severity of the bodily injury and deterioration of health is
dependant on numerous conditions which can be foreseen partially only by considering them when
designing the device and by providing descriptions and warnings as pictograms in the instruction
manual and on the device. Therefore
residual risk
is present if recommendations and advices in the
instruction manual and warnings as pictograms placed on the machine are not followed.
19. INFORMATION
Regular inspections carried out by qualified technical service or by JUWENT Authorised Service
Points shall ensure a reliable and problem-free operation for many years. At any time our service
technicians can be called up to conduct start-ups of the devices and maintenance works on them,
and are at your disposal in emergency situations.
At any JUWENT Authorised Service Point you can order spare parts and consumables for your unit.
When ordering the parts, always give the device type and size, and its serial number.
