24
www.juwent.com.pl
VALVE ACTUATORS
For direct installation on the valves electric power actuators are used, and they provide a step-less
valve control.
The actuator is mounted on the valve using a connecting nut, and during the installation the actuator
must be set in 0 position. It is recommended to install the valve in such position so that the actuator
is above the valve in an accessible location.
Actuator type
0...10V continuous
signal
1 - Potential
2 - Ground
8 - Control signal 0..10V
Supply voltage
24V AC
Close / open time
150 sec.
Protection level
IP40
* optional elements
Fig.1 Connection diagram for OPTIMAX automatic equipment components to power supply box.
