background image

0845 1204582

www.justkampers.com

JK part numbers:  

J20264
OEM part number:  

Not applicable

Just Kampers, Unit 1 Stapeley Manor, Long Lane, Odiham, Hants. RG29 1JE

NB. Please note that whilst every attempt is made to ensure that these instructions are as 

accurate and clear as possible, we cannot be held responsible for misinterpretation of these 

instructions or for any subsequent accident or damage caused through mis-fitted parts.

Tech Sheet

Spot Colour Pantone 653

Spot Colour P653/P151

Spot Colour White out

4 Colour Blue

4 Colour White out

4 Colour Blue/Orange

Black

White

Spot Colours

Process Colours

Page 6 of 7

2. CAREFULLY remove end poles and 
slide out porch pole. Remove and fold up flysheet.

3. Unfasten ‘C’ clips and Velcro from the frame, go inside 
and pull down the handle to collapse the awning.

2. Before proceeding MAKE SURE ALL GUYS 

HAVE BEEN RELEASE AND PACKED AWAY!

CAREFULLY remove the porch end pins, failure 

to do so could result in tearing the awning 

fabric. 

Now remove the end sections and then remove 

the porch pole from the porch and disassemble.

Remove the fly sheet and fold up ready to fit in 
the carry bag.

3. Before proceeding MAKE  SURE ALL WINDOW 

FLAPS AND DOORS ARE ZIPPED UP!

IMPORTANT: Unfasten the clips and Velcro tags 

from the frame (failure to do this may result in 

damage to the pop mechanism!)

Go inside the awning, grab the pull handle in 

the centre of the roof and pull down - AVOID 

STANDING DIRECTLY BENEATH THE CENTRE 

HUB AS YOU PULL IT DOWN!

Once the roof is down, exit the awning and zip 
up the door.

1. Before packing down make sure the awning 

is dry, otherwise mildew may form.

Remove the gutter clamps from your vehicle, 

extract the three part pole and disassemble.

If the sun canopies are in use release the guys, 

remove the poles and zip up the awning sides. 

Remove the pegs from the elasticated pegging 

loops and from the guy ropes, but leave the 

corner ground pegs in for now. Roll up and 

return the guys to the zipped pockets. 

Undo the four clips and Velcro tags on each leg.

1. Remove guys, undo four leg clips and Velcro tags. 

Packing down

Summary of Contents for Pop Up 365









Reviews: