manualshive.com logo in svg

jurop PN 155, Operating And Maintenance Instructions Manual, Page: 7 / 17

Share
Download
jurop PN 155 Operating And Maintenance Instructions Manual Download Page 7

•

Do not start the machine if the protection devices provided for transmissions are removed. Replace
damaged parts.

•

Pressure relief valve: point the air flux away from the operators.

•

Do not use the aspirator over its designed limits: the machine may be damage and the operator may
be injured.

Dispose of exhausted oil (accumulated in the silencer’s separator at the exhaust) and the oil used in 
the vacuum pump maintenance (internal wash-up or periodical replacement in the gear box) as 
provided by current specifications. 

Legend of main components:

 

A. 

Multiplier gear box 

B. 

Manifold 

C. 

Vacuum – pressure manifold 

D. 

Non return valve 

E. 

Vacuum relief valve connection 

F. 

Oil tank 

G. 

Oilers 

H. 

Lubrication pump 

I. 

Air injection valve 

J. 

Swivelling conveyor 

K. 

Conveyor with safety valve connection 

L1. 

Tank oil stand 

L2. 

Gear box oil stand 

8. INSTALLATION

www.fraserwoods.ca

Summary of Contents for PN 155


















Reviews:

No comments