background image

5

IMPRESSA X

S

95/X

S

90 One Touch – Quick Reference Guide

Place a receptacle (at least 500 ml) under the frother.

If you are using the 

Professional Cappuccino Frother

, set the 

selection lever of the frother to the steam position 

n

.

 c T

 Press the maintenance button.

FILTER RINSING

, water flows out of the frother.

You can interrupt filter rinsing at any time. To do this, press 
any button.
The water may be slightly discoloured. This is not harmful to 
health and does not affect the taste.

Filter rinsing stops automatically after approx. 500 ml. The 
IMPRESSA heats up and is once again ready to use.

After 220 coffee preparations or 80 switch-on rinses, the IMPRESSA 
will prompt you to clean it.

If the wrong cleaning agent is used, the machine could be damaged 
and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

The cleaning programme only lasts about 20 minutes.
Do not interrupt the cleaning programme. The quality of 
cleaning will be impaired if you do so.
JURA cleaning tablets are available from stockists.

Precondition

COFFEE READY

 / 

CLEAN MACHINE

 is dis-

played, and the maintenance button 

c

 lights up.

 c T

 Press the maintenance button.

DURATION 20 MIN.

 / 

START YES

If you want clean the machine at a later point in time, turn the 
Rotary Switch until 

START NO

 is displayed. Exit the mainte-

nance programme by pressing the Rotary Switch. The prompt 
‘Clean machine’ remains on the display.

T

E

E

E

T

E
E

E

E

Cleaning the machine  

Cleaning the machine  

CAUTION

CAUTION

Summary of Contents for IMPRESSA XS90 ONE TOUCH













Reviews: