Jura IMPRESSA XS90 ONE TOUCH, Quick Reference Manual

Page: 4 / 12

4
IMPRESSA X
S
95/X
S
90 One Touch – Quick Reference Guide
After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to replace the filter.
After two months, the filter will cease to work. Monitor the
elapsed time by adjusting the date plate on the cartridge
holder.
If the CLARIS plus filter cartridge is not activated, you will not
be prompted to change the filter.
To change the CLARIS plus filter cartridge when prompted to do so
by your IMPRESSA, proceed as follows:
Precondition
:
COFFEE READY
/
CHANGE FILTER
is dis-
played, and the maintenance button
c
lights up.
c T
Press the maintenance button.
DURATION 2 MIN.
/
START YES
If you want to change the filter at a later point in time, turn the
Rotary Switch until
START NO
is displayed. Exit the mainte-
nance programme by pressing the Rotary Switch. The prompt
‘Change filter’ remains on the display.
c T
Press the maintenance button.
CHANGE FILTER
/
PRESS RINSE
Remove the water tank and empty it.
Lift the cartridge holder.
Take out the old CLARIS plus filter cartridge and the exten-
sion.
Fit the extension on top of a new filter cartridge.
Insert the filter cartridge into the water tank, exerting slight
pressure.
Close the cartridge holder. It will click into place audibly.
Fill the water tank with fresh, cold water and reinsert.
E
E
E
E
T
T
T
T
T
T
T
Changing the filter Changing the filter