Elektroapparate AG
Technical information
Technical Support
Language
EN
IMPRESSA XJ9 One Touch TFT
Professional
Author: Patrik Studer
Checked:
Approved:
Docu.-name:
Technische_Informationen_XJ9_EN.doc
L:\Geräte\Linie_XJ\XJ9\Schulungsunterlagen\E\Technische_
Informationen_XJ9_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
26.06.2012
15.11.2012
23.11.2012
12.03.2013
02.04.2013
08.08.2013
Page 10/17
13.6
Temperature:
13.6.1
Coffee:
Draw off temperature is measured at the outlet and is, depending on settings, between
84 °C … 89 °C (183 °F … 192 °F)
Programmable NORMAL/HIGH, difference is ca. 2 °C (3.6 °F)
Each product can be programmed individually
In the range of < 80 ml, an intelligent heating system comes to action which is able to remember
the time of the last product taken. Therefore, at the beginning of a draw off it will heat up slightly
higher in temperature to compensate the loss.
13.6.2
Hot water:
°C
°F
REGULAR
65-75
149-167
NORMAL
75-85
167-185
HOT
85-95
185-203
13.7
Product selector view:
Deactivate and activate the product selector view
13.7.1
Active:
Product selector view is active and can be started by turning the Rotary Switch when the IMPRESSA
is ready for use
13.7.2
Inactive:
Product selector view is inactive
13.8
One-off settings:
Specify whether or not to allow one-off settings during preparation
13.8.1
Active:
One-off settings can be made during preparation (e.g. coffee strength or amount of water)
13.8.2
Inactive:
One-off settings cannot be made during preparation. The product is prepared according to the
settings in programming mode (‘Product settings (2/6)’ / ‘Expert mode’).
13.9
Lock/enable:
Specify whether or not to allow one-off settings during preparation
The lock symbol indicates whether the product is enabled or disabled.
If the lock is closed, the product is disabled.
