Jura IMPRESSA J9.4 One Touch TFT Instructions For Use Manual Download Page 46

Page: 46 / 52

8 Transport and environmentally friendly disposal

In order to protect the IMPRESSA from frost during transport, the
system must be emptied.

Precondition:

‘Please select product:’

is displayed.

Carefully pull the cappuccino frother down and off.

Place a receptacle under the connector of the cappuccino

frother.

Press the

‘1 portion milk’

button.

‘1 portion milk’

, hot steam is discharged from the connector.

Remove and empty the water tank.

Turn the Rotary Switch until

‘60 sec.’

is displayed.

Steam will continue to be discharged from the connector
until the system is empty.

‘Fill water tank’

Press the On/Off button.

The IMPRESSA is switched off.

Please dispose of old machines in an environmentally neutral way.

Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.

Transport / Emptying the
system

Disposal

Summary of Contents for IMPRESSA J9.4 One Touch TFT





















































Search results

Summary of Contents for IMPRESSA J9.4 One Touch TFT

Reviews:

Related manuals for IMPRESSA J9.4 One Touch TFT

Brands by name

Popular brands

Jura IMPRESSA J9.4 One Touch TFT, Instructions For Use Manual

Search results

Summary of Contents for IMPRESSA J9.4 One Touch TFT

Reviews:

Related manuals for IMPRESSA J9.4 One Touch TFT

Brands by name

Popular brands