Jura IMPRESSA J9.4 One Touch TFT, Instructions For Use Manual

Page: 24 / 52

24
4 Permanent settings in programming mode
In the programme item ‘Product settings (2/6)’ / ‘Expert mode’ you
can make individual settings for all speciality coffees, milk and hot
water. The following settings can be made:
Product Temperature Coffee strength Amount
Ristretto,
Espresso,
Coffee ‘Normal’ , ‘High’
‘extra-mild’
;
, ‘mild’
;;
, ‘normal’
;;;
,
‘strong’
;;;;
, ‘extra-strong’
;;;;;
Volume:
‘25 ml’ – ‘240 ml’
Two ristretti,
Two espressi,
Two coffees ‘Normal’ , ‘High’ – Volume:
‘25 ml’ – ‘240 ml’
(per cup)
Latte
macchiato,
Cappuccino ‘Normal’ , ‘High’
‘extra-mild’
;
, ‘mild’
;;
, ‘normal’
;;;
,
‘strong’
;;;;
, ‘extra-strong’
;;;;;
Amount of milk:
‘3 sec.’ – ‘120 sec.’
Interval:
‘0 sec.’ – ‘60 sec.’
Volume:
‘25 ml’ – ‘240 ml’
Portion of
milk – – ‘3 sec.’ – ‘120 sec.’
Hot water ‘Low’ , ‘Normal’ ,
‘X high’
– ‘25 ml’ – ‘450 ml’
Example: Proceed as follows to change the amount of milk for a
latte macchiato from ‘16 sec.’ to ‘20 sec.’ , the interval from ‘30 sec.’
to ‘40 sec.’ and the amount of water from ‘45 ml’ to ‘40 ml’ .
Precondition: ‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenance status (1/6)’
g T
Turn the Rotary Switch until the programme item ‘Product
settings (2/6)’ is displayed.
T
Press the ‘Expert mode’ button.
‘Please select product:’
E
Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T
Press the ‘Latte macchiato’ button.
‘Latte macchiato’
T
Press the ‘Amount of milk’ button.
Product settings