27
4 Permanent settings in programming mode
k
T
Press the Rotary Switch to exit programming mode.
READY
E
If you are using the CLEARYL Blue filter cartridge and have
activated it, it is not possible to set the water hardness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH.
Example:
Proceed as follows to change the water hardness setting
from
16 °dH
to
25 °dH
.
Precondition:
READY
is displayed.
k
T
Press
and hold
the Rotary Switch until
RINSE
appears.
g
T
Turn the Rotary Switch until
HARDNESS
is displayed.
k
T
Press the Rotary Switch to enter the program item.
16 °dH
g
T
Turn the Rotary Switch until
25 °dH
is displayed.
k
T
Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
HARDNESS
g
T
Turn the Rotary Switch until
EXIT
is displayed.
k
T
Press the Rotary Switch to exit programming mode.
READY
The energy-saving mode (Energy Save Mode, E.S.M.
©
) helps you to
prevent your machine from consuming power unnecessarily and to
actively save energy:
U
ENERGY w
U
Soon after the last preparation, the IMPRESSA stops heating
up. After about 5 minutes the message
ENERGY ON
is dis-
played.
U
Before you can prepare a specialty coffee, steam or hot
water, the machine must heat up.
U
ENERGY -
U
All specialty coffees as well as hot water can be prepared
without having to wait.
U
Before you can prepare steam, the machine must heat up.
Setting the water
hardness
Energy-saving mode
