24
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T
Use extreme care when handling hot liquid or steam.
T
Allow liquid to cool down before drinking.
T
In the event of scalding, rinse affected area with cold water an
seek medical attention.
T
Keep children AWAY.
You can make permanent settings in programming mode. You can
navigate through the program items and permanently save the
required settings simply by turning and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Program item
Sub-item
Explanation
RINSE
C CLEANING
,
RINSE
,
C RINSE
,
CLEAN
,
FILTER
(only if filter
is activated),
DESCALE
(only if filter
is not activated)
T
Start
the required maintenance program
here.
If no action is taken in this program item,
programming mode is exited automatically
after approximately 5 seconds.
BUTTONS
SELECT BUTTON
T
Select your settings for specialty coffees and
hot water.
FILTER w
/
FILTER -
YES
,
NO
T
Indicate whether you are operating your
IMPRESSA with or without a CLEARYL Blue
filter cartridge.
HARDNESS
(only if
filter is not activated)
1 °dH
–
30 °dH
T
Adjust the water hardness.
ENERGY w
/
ENERGY -
SAVE w
,
SAVE -
T
Choose whether you want to operate your
IMPRESSA with or without energy-saving
mode.
OFF AFTER
15 MIN.
,
30 MIN.
,
1 HRS.
–
15 HRS.
T
Set the time after which the IMPRESSA
should switch off automatically.
RINSES
INIT RINSE
,
C-RINSE
T
Change the settings for the switch-on rinse
and the cappuccino rinse.
J
WARNING
