28
4 Permanent settings in programming mode
Precondition:
READY
is displayed.
k
T
Press
and hold
the Rotary Switch until
RINSE
appears.
g
T
Turn the Rotary Switch until
RINSES
is displayed.
k
T
Press the Rotary Switch to enter the programme item.
INIT RINSE
g
T
Turn the Rotary Switch until
C-RINSE
is displayed.
k
T
Press the Rotary Switch to enter the programme item.
AFTER 10'
g
T
Turn the Rotary Switch until
NOW
is displayed.
k
T
Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
C-RINSE
g
T
Turn the Rotary Switch until
EXIT
is displayed.
k
T
Press the Rotary Switch to exit the programme item.
RINSES
g
T
Turn the Rotary Switch until
EXIT
is displayed.
k
T
Press the Rotary Switch to exit programming mode.
READY
In the programme item
RESET ALL
you can reset various set-
tings to their factory settings:
U
PRODUCT
U
The settings (amount, coffee strength and temperature) for
any product can be reset
individually
to the factory settings.
The corresponding double product is also reset to the fac-
tory settings at the same time.
U
ALL PROD.
U
The settings (amount, coffee strength and temperature) for
all products
are reset to the factory settings.
U
MACHINE
U
All user settings
(apart from the ‘filter’ and ‘water hardness’)
are reset to factory settings. Your IMPRESSA then switches
off.
Example:
Proceed as follows to reset the values for ‘Espresso’ to the
factory settings.
Precondition:
READY
is displayed.
k
T
Press
and hold
the Rotary Switch until
RINSE
appears.
g
T
Turn the Rotary Switch until
RESET ALL
is displayed.
Restore factory settings
Summary of Contents for Impressa F
Page 51: ...51...
