Jura Impressa F, Instructions For Use Manual

Page: 23 / 52

23
4 Permanent settings in programming mode
4 Permanent settings in programming mode
You can make permanent settings in programming mode. You can
navigate through the programme items and permanently save the
required settings simply by turning and pressing the Rotary Switch.
You can make the following settings with the Rotary Switch:
Programme item Sub-item Explanation
RINSE C CLEANING
,
RINSE
,
C RINSE
,
CLEAN
,
FILTER
(only if filter
is activated),
DESCALE
(only if filter
is not activated)
T Start
the required maintenance programme
here.
If no action is taken in this programme item,
programming mode is exited automatically
after approximately 5 seconds.
BUTTONS SELECT BUTTON
T Select your settings for speciality coffees and
hot water.
FILTER w
/
FILTER -
YES
,
NO
T Indicate whether you are operating your
IMPRESSA with or without a CLARIS Blue filter
cartridge.
HARDNESS
(only if
filter is not activated)
1 °dH
–
30 °dH
T Adjust the water hardness.
ENERGY w
/
ENERGY -
SAVE w
,
SAVE -
T Choose whether you want to operate your
IMPRESSA with or without energy-saving
mode.
OFF AFTER 15 MIN.
,
30 MIN.
,
1 HRS.
–
15 HRS.
T Set the time after which the IMPRESSA
should switch off automatically.
RINSES INIT RINSE
,
C-RINSE
T Change the settings for the switch-on rinse
and the cappuccino rinse.
RESET ALL PRODUCT
,
ALL PROD.
,
MACHINE
T Reset the machine or the permanently set
values of all products to the factory settings.