40
5 Maintenance
T
Remove and empty the water tank.
T
Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a receptacle holding 17 oz (500 ml) of water.
This may take several minutes.
T
Pour the solution into the empty water tank and insert it into
the machine.
SWITCH OPEN
, the light segment on the switch lights up.
T
Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
T
Place a receptacle (at least 17 oz or 500 ml) under the
Connector System
©
.
h
T
Turn the switch to the
m
position.
DESCALE
, water flows out of the Connector System
©
sev-
eral times. The Maintenance symbol
c
flashes during the
descaling operation.
The operation is interrupted,
SWITCH CLOSE
.
j
T
Turn the switch to the
o
position.
DESCALE
, the descaling operation is continued.
The operation is interrupted,
EMPTY TRAY
.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
FILL TANK
T
Empty the receptacle and place it back under the Connector
System
©
.
T
Place another receptacle under the coffee spout.
T
Remove the water tank and rinse it thoroughly.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
, the light segment on the switch lights up.
h
T
Turn the switch to the
m
position.
DESCALE
, the descaling operation is continued.
The operation is interrupted,
SWITCH CLOSE
.
j
T
Turn the switch to the
o
position.
DESCALE
, the descaling operation is continued.
The operation is interrupted,
DESCALE
.
Water flows out of the coffee spout.
EMPTY TRAY
T
Re-assemble the fine foam frother.
