Jura GIGA X7 Professional, Instructions For Use Manual

Page: 30 / 64

30
4 Permanent settings in programming mode
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the ‘Latte macchiato’ button.
T Press the ‘Amount of milk’ button.
T Press the ‘+’ or ‘–’ button to change setting for the amount
of milk to ‘6 sec.’ .
T Press the ‘Save’ button.
T Press the ‘Amount of milk foam’ button.
T Press the ‘+’ or ‘–’ button to change setting for the amount
of milk foam to ‘14 sec.’ .
T Press the ‘Save’ button.
T
Press the ‘Volume’ button.
T
Press the ‘+’ or ‘–’ button to change setting for the fill vol-
ume to ‘1.0 oz’ (40 ml).
T Press the ‘Save’ button.
O T Press the P button to exit programming mode.
‘Please select product:’
In the program item ‘Product settings (2/5)’ / ‘Set consistency of
grind’ you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind setting is correct if the coffee flows regu-
larly from the dual spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition: ‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
g T Turn the Rotary Switch until the program item ‘Product set-
tings (2/5)’ is displayed.
T Press the ‘Set consistency of grind’ button.
‘Set consistency of grind’
T Press the ‘Right grinder’ button.
‘Right grinder’
T
Press the ‘+’ or ‘–’ button to change the setting for the con-
sistency of grind.
Setting the consistency
of grind