Jura Giga X3 Professional, Instructions For Use Manual

Page: 27 / 60

27
4 Permanent settings in programming mode
Precondition: ‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenance status (1/5)’
g T
Turn the Rotary Switch until the programme item ‘Product
settings (2/5)’ is displayed.
T
Press the ‘Expert mode’ button.
‘Expert mode’
E
Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E
You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T
Press the ‘Latte macchiato’ button.
T
Press the ‘Amount of milk’ button.
T
Press the ‘+’ or ‘ –’ button to change the setting for the
amount of milk to ‘6 sec.’ .
T
Press the ‘Save’ button.
T
Press the ‘Amount of milk foam’ button.
T
Press the ‘+’ or ‘ –’ button to change the setting for the
amount of milk foam to ‘14 sec.’ .
T
Press the ‘Save’ button.
T
Press the ‘Volume’ button.
T
Press the ‘+’ or ‘ –’ button to change the setting for the fill
volume to ‘40 ml’ .
T
Press the ‘Save’ button.
O T
Press the P button to exit programming mode.
‘Please select product:’
In the programme item ‘Product settings (2/5)’ / ‘Programming’ you
can rename all of the products.
Example: Proceed as follows to change the product name from
‘Espresso’ to ‘My espresso’ .
Precondition:
‘Please select product:’ is displayed.
O T
Press the P button.
‘Maintenance status (1/5)’
Renaming a product