manualshive.com logo in svg

Jura GIGA W3 Professional, Instructions For Use Manual

Share
Download
Jura GIGA W3 Professional Instructions For Use Manual Download Page 10

10

1  Preparing and using for the first time

1  Preparing and using for the first time

Visit us on the Internet. On the JURA website (www.jura.com) you 
will find interesting and up-to-date information on your GIGA and 
on every aspect of coffee.

When setting up your GIGA, please note the following:

 

U

Place the GIGA on a horizontal surface that is not sensitive to 
water.

 

U

Choose a spot for your GIGA which protects the machine 
against overheating. Ensure that the ventilation slats are not 
covered.

Daily maintenance of the machine and hygiene when handling milk, 
coffee and water are key to a perfect coffee result in the cup every 
time. You should therefore change the water 

daily.

Milk, sparkling mineral water or other liquids can damage the water 
tank or the machine.

T

   Only fill the water tank with fresh, cold water.

T

  Open the water tank cover.

T

  Remove the water tank and rinse it with cold water.

T

  Fill the water tank with fresh, cold water and reinsert the 

tank.

T

  Close the water tank cover.

JURA on the Internet   

Setting up the machine  

Filling the water tank  

CAUTION

Summary of Contents for GIGA W3 Professional





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands