17
4 Permanent settings in programming mode
pt
es
nl
en
fr
ru
en
de
T
Rinse the water tank with clean water.
T
Dismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
T
Wipe the surface of the machine with a clean,
soft, damp cloth (e.g. microfiber cloth).
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a specialty coffee has been
prepared. If cappuccino or latte macchiato has
been prepared, the cappuccino rinse also takes
place.
T
Place a receptacle under the dual spout.
Q
T
Press the On/Off button.
RINSING
,
CAPPUCCINO
RINSING
, the system rinses itself,
stopping automatically. The ENA is switched
off.
E
When the ENA is switched off with the On/
Off button, the machine does
not consume
standby energy.
4 Permanent settings in pro-
gramming mode
Products
In the program item
PRODUCT
you can make
individual settings for all specialty coffees and milk
specialties.
J
WARNING
Hot coffee, hot steam and hot water can cause
scalding. Scalding is a serious burn.
T
Use extreme care when handling hot liquid
or steam.
T
Allow liquid to cool down before drinking.
T
In the event of scalding, rinse affected area
with cold water and seek medical attention.
T
Keep children AWAY.
You can make the following permanent settings for
the
specialty coffees:
U
Amount of water:
0.5 OZ
–
8.0 OZ
(25 ml – 240ml) (per cup)
U
Coffee strength (for 1 coffee):
MILD
,
NORMAL
,
STRONG
U
Temperature:
NORMAL
,
HIGH
(approx. 176–205 °F (80–96 °C))
You can make the following permanent settings for
latte macchiato and cappuccino:
U
Amount of milk foam:
3 SEC
–
120 SEC
U
Interval:
0 SEC
–
60 SEC
U
Coffee strength:
MILD
,
NORMAL
,
STRONG
U
Amount of water:
0.5 OZ
–
8.0 OZ
(25 ml – 240ml)
U
Temperature:
NORMAL
,
HIGH
(approx. 176–205 °F (80–96 °C))
Permanent settings in programming mode always
follow the same model.
Example:
Permanently change the coffee strength
(
FLAVOUR
) for 1 coffee from
NORMAL
to
STRONG
.
Precondition:
READY
is displayed.
k
T
Press
and hold
the Rotary Switch until
RINSE
appears.
g
T
Turn the Rotary Switch until
PRODUCT
is
displayed.
k
T
Press the Rotary Switch to enter the
program item.
SELECT BUTTON
E
Next select the button of the product for
which you would like to make settings. No
product is prepared at this point.
E
To change the setting for a double product,
press the corresponding button twice within
two seconds.
>
T
Press the Coffee button.
1 COFFEE
WATER
g
T
Turn the Rotary Switch until
FLAVOUR
is
displayed.
Summary of Contents for ENA 9 One Touch
Page 7: ...7 pt es nl en fr ru en de IMPORTANT SAFEGUARDS ...
Page 32: ...32 ...
