7 Maintenance
25
T
Press the
‘Clean the milk system’
button�
T
Press the
‘Start’
button�
‘Clean the milk system’
/
‘Milk system cleaner’
T
Remove the milk pipe from the milk container or milk cooler�
T
Pour one dosing unit of milk system cleaner into the container
for milk system cleaning�
T
Place the container under the hot-water spout and the fine
foam frother and connect the milk pipe with the container�
E
To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector�
T
Press the
‘Next’
button�
The fine foam frother and the milk pipe are cleaned�
The operation stops automatically�
If insufficient foam is produced when the milk is frothed or milk
sprays out of the fine foam frother, the frother may be clogged� If
this happens, dismantle and rinse the fine foam frother�
T
Remove the milk pipe and rinse it thoroughly under running
water�
T
Remove the fine foam frother�
T
Dismantle the fine foam frother into its individual parts�
T
Rinse all the parts under running water� If there are severely
dried-on milk residues, first immerse the individual parts in a
solution of 8�5 oz (250 ml) water and one dosing unit of JURA
milk system cleaner� Then rinse the individual parts thoroughly�
6
E8
E8
Dismantling and rinsing the
fine foam frother
E8
E8
1
2
Summary of Contents for 15371
Page 1: ...E8 NAA Instructions for Use For your safety read and understand manual before use ...
Page 37: ...37 ...
Page 38: ...38 ...
Page 39: ...39 ...
