Jura 14011 Instructions For Use Manual Download Page 40

Page: 40 / 56

5 Maintenance

Insert a

new

CLARIS Pro Smart filter cartridge into the water

tank, exerting slight pressure.

Close the filter holder. It will click into place audibly.

Fill the water tank with fresh, cold water and reinsert the

tank.

The machine automatically detects that you have just inserted/
changed the filter cartridge.

‘Filter operation’

‘Saved’

‘Filter is being rinsed’

, the filter is rinsed. The water flows

directly into the drip tray.

‘Empty drip tray’

Empty the drip tray and coffee grounds container and put

them back into the machine.
The start screen is displayed. Your GIGA is once more ready
for use.

After 180 preparations or 80 switch-on rinses, the GIGA will prompt
you to clean it.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

Use only original JURA maintenance products.

The cleaning programme lasts approximately 20 minutes.

Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.

JURA cleaning tablets are available from specialised dealers.

Precondition:

The start screen is displayed.

‘Clean machine’

is dis-

played.

Touch

‘Clean machine’

‘Clean’

Touch

‘Clean’

Touch

‘Start’

Touch

‘Start’

again.

‘Empty coffee grounds container’

Cleaning the machine

CAUTION

Summary of Contents for 14011

























































Search results

Summary of Contents for 14011

Reviews:

Related manuals for 14011

Brands by name

Popular brands

Jura 14011, Instructions For Use Manual

Search results

Summary of Contents for 14011

Reviews:

Related manuals for 14011

Brands by name

Popular brands