32
4 Permanent settings in programming mode
In the programme item
‘Machine settings’
/
‘Save energy’
you can
set an energy-saving mode:
U
‘1’
U
Soon after the last preparation, the GIGA stops heating up.
After approximately 5 minutes, the ‘ESM’ symbol (Energy
Save Mode, E.S.M.
©
) is displayed.
U
Before you can prepare a speciality coffee, speciality coffee
with milk, or hot water, the machine must heat up.
U
‘0’
U
All speciality coffees, speciality coffees with milk and hot
water can be prepared without having to wait.
Example:
Proceed as follows to switch energy-saving mode on.
Precondition:
The start screen is displayed.
T
Touch
‘ P ’
.
‘Maintenance status’
T
Turn the Rotary Switch until
‘Machine settings’
is displayed.
T
Press the Rotary Switch.
‘Switch off after’
T
Turn the Rotary Switch until
‘Save energy’
is displayed.
T
Press the Rotary Switch.
‘Save energy’
T
Now move your finger across the controller and set it to
‘1’
.
T
Touch
‘Save’
.
‘Saved’
appears briefly on the display.
‘Save energy’
T
Touch
‘Back’
the number of times needed to display the start
screen again.
In the programme item
‘Machine settings’
/
‘Lock/enable’
you can
disable/enable the following settings:
U
‘One-off settings’
: One-off settings can be made
during prep-
aration
(e.g. coffee strength or amount of water).
U
‘Expert mode’
: You can access the product settings by touch-
ing a product for approximately 2 seconds.
U
‘Rotary Selection’
:
Product selector view
with additional
products can be started by turning the Rotary Switch.
U
‘Alarm displays’
: The start screen displays messages such as
‘Clean machine’
or
‘Clean the milk system’
.
Energy-saving mode
Enabling and disabling
functions
