background image

18

Switch on your machine by pressing ON/OFF 

key

Press key 

until you can hear an acoustic signal.

EMPTY TRAY

(FILL WATER might show as well)

Put a sufficiently large container under the coffee-spout (15)
in order to prevent cleaning liquid from running into the drip
tray.

ADD TABLET (Fig. 9) / PRESS CLEANING

UNIT CLEANING / PLEASE WAIT

EMPTY TRAY

PLEASE WAIT

RINSE UNIT

COFFEE READY

The powder funnel for pre-ground coffee should be cleaned
after each cleaning process. Remove it from the machine,
rinse it with hot tap water and replace it after drying.

16. Decalcifying

Your machine has an integrated decalcifying program. It lasts
approx. 50 minutes.
Please use Jura decalcifying tablets only. These are available from
your Jura dealer.

Run the decalcifying program only after the machine has
been 

switched off for at least 5 hours

and has cooled down

completely. The running decalcifying program must 

not

be

interrupted.

If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especi-
ally natural stone and wooden surfaces, or take correspond-
ing precautions.

In any case please wait until the filled decalcifying agent is
used up and the tank is empty. Never top up the decalcifying
agent.

Remove and empty water tank.

Replace empty water tank.

Switch off your machine by pressing ON/OFF 

key and let it

cool down for approx. 5 hours.

Open cover (3).

Press key 

until you can hear an acoustic signal.

EMPTY TRAY

AGENT IN TANK

Pour 0.6 litres of water into a container and completely dis-
solve the contents of a blister pack (2 tablets). Then fill the
mixture into the water tank. 

AGENT IN TANK / OPEN TAP / PRESS CALC

Place a sufficiently large container under the pivoting nozzle
(20). Remove the Profi Auto-Cappuccino/Caffè Latte.

Turn selector switch for coffee (19) to the symbol 

and press

key .

UNIT DECALCIFYING / PLEASE WAIT

When an acoustic signal is heard place a container under the
height-adjustable tea-spout (22).

PRESS CALC

UNIT DECALCIFYING / PLEASE WAIT

CLOSE TAP

UNIT DECALCIFYING / PLEASE WAIT

Inside the machine the decalcifying agent is conducted to the
drip tray.

EMPTY TRAY

Summary of Contents for IMPRESSA X90























Reviews: