14
By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.4 Programming steam portion
STEAM PORTION
Press key
.
PORTION /....20 SEC.
By pressing key
or
you can programme time in seconds
(drawing off time of 3 – 250 sec.)
Press key
.
STEAM PORTION
By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.5 Programming tea portion
Place a cup under the height-adjustable tea-spout (22).
Press key
.
OPEN TAP
ENOUGH TEA? / CLOSE TAP
TEA PORTION
The required portion of tea-water is programmed now.
By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
13.6 Programming Filter
Please read chapter 7.1 “Placing filter“.
N
+
P
N
+
P
-
+
P
N
+
13.7 Programming water hardness
(only with setting Filter no)
HARDNESS LEVEL 3
Press key
By pressing key
or
briefly you can programme the water
hardness level.
Then press key
briefly to store the water hardness level in
memory.
By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
To determine the water hardness level please read chapter 6.
“Adjusting for water hardness“.
13.8 Programming economy mode
ECONOMY MODE OFF
Press key
By briefly pressing key
or
you can programme the mode
you would like.
Then press key
briefly to store mode in memory
By pressing the
button, you can select the next phase, or
press the
button in order to leave the programming.
You can programme your machine to “economy mode“. In the set-
ting ECONOMY MODE ON the steam heating-system is switched
off. The heating for the cup warming tray is switched off too. If
you want to draw off steam you need to press the steam key
,
warning lamps flash and your machine heats up.
After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.
N
+
P
-
+
P
N
+
P
-
+
P
