• Never repair or open the machine yourself. All repairs should
be performed only by an authorized service center.
PLEASE, DO...
• Fill water tank with fresh, cold water only.
• Remove any foreign particles (small stones) from coffee beans.
• Let frozen beans thaw 3 to 4 hours before pouring them into
the bean container.
5. FACTORY SETTINGS
Each machine leaves the factory with the following settings:
Milk Button ..................... 20 seconds
Cappuccino Button ........ 15 seconds milk, 3 oz. coffee, strength
NORMAL, temperature HIGH:
Special Coffee Button .... 3 oz., XSTRONG, HIGH
Hot Water Button ........... 6 oz.
1 Espresso Button.......... 1.5 oz., STRONG, HIGH
2 Espresso Button.......... 3.0 oz., STRONG, HIGH
1 Coffee Button .............. 5.0 oz., NORMAL, HIGH
2 Coffee Button .............. 10.0 oz., NORMAL, HIGH
Please note: You can change all above presets (chapter 26).
You can also override the strength and the cup size before/during
actual brewing. Overriding will not change the preset values.
Filter................................ No (not installed) (chapter 23)
Hardness Level............... 10º (chapter 24)
Auto-Off.......................... 2 Hours (chapter 26.9)
Grinder Fineness ............ Middle position (chapter 7)
Economy ........................ NO SAVE (chapter 26.6)
Time format .................... AM/PM (chapter 26.13)
Volume ml/oz.................. in ounces (chapter 26.13)
Language ....................... English (chapter 26.12)
Time ............................... Not set (chapter 26.7)
Unit On (Auto-On) ......... Not set (chapter 26.8)
CUP ILLUMINATION (Fig. 1,7)
The cup illumination adds a dramatic touch to brewing coffee.
Providing the main power switch is on, you can activate the cup
illumination for 1 minute by pressing any button.
6. PREPARING THE MACHINE FOR THE FIRST TIME
• Make sure all accessories, literature and any other items are
removed from the bean container and the water tank.
• DO NOT install the Clearyl water filter now. (chapter 23)
• Make sure the machine sits on an even, flat surface and the
drawer, tray and used coffee container are inserted (Fig.1, Fig. 2).
• Plug-in machine.
6a. FILLING THE WATER TANK
Please note: Only use fresh, cold water. Never fill water tank
with carbonated water, milk or any other liquid.
• Open the Water Tank Lid, remove the water tank, rinse and fill
with fresh, cold water (Fig. 7).
• Replace water tank and make sure that the two slots are
engaged over the two hooks to secure the tank properly.
• Close lid.
6b. FILLING THE BEAN CONTAINER
Please note: To insure that your conical burr grinder will work
for a long time, do not use it with any kind of coated or flavored
12.
