Juplink RX4-1800 Page 52 User Manual Download

Page: 52 / 65

3) Select Wi-Fi network in repeater SSID list and enter the wireless password in the

Key

field.

Note: It is recommended to enable

Inherit wireless name and key

4) Click

One Button Wireless Relay

button. Your router will then reboot, and

the expanded

new wireless network will be established in 2 minutes. After that, you can enjoy the
extended Wi-Fi.

8.14. AP Mode (Bridge Mode)

1) After logging in to your router, click

Basics

WAN

2) Select

Bridge

from

Link Mode

drop-down list, and click

Apply

to finish your settings.

Note:

-In bridge mode, all devices connected to this router are managed by the uplink router.
-If you have multiple APs and want unified management for seamless roaming, it is
recommended to turn on the

Dual Band Integration

mode and set a unified SSID.

Summary of Contents for RX4-1800


































































Search results

Summary of Contents for RX4-1800

Reviews:

Related manuals for RX4-1800

Brands by name

Popular brands

Juplink RX4-1800, User Manual

Search results

Summary of Contents for RX4-1800

Reviews:

Related manuals for RX4-1800

Brands by name

Popular brands