46
8.10.3. IPv6 LAN IP Configuration
1) After logging in to your router, click
Basics
>
LAN
>
IPv6 LAN IP Configuration
.
2) Select your
Addressing Type
from drop-down list (
Stateless
is the default setting).
After modify your
Start IPv6 Address
and
End IPv6 Address
, click
Save
to finish your
settings.
8.10.4.
LAN prefix config
1) After logging in to your router, click
Basics
>
LAN
>
LAN prefix config
.
2) Turn on
Enable Prefix static
, and fill in
Prefix
setting.
It is recommended to keep
Preferred LifeTime
and
Valid LifeTime
as the default values.
3) Before setting, use the
ifconfig
command to view the IP address obtained in SSH and
write down the prefix.
For example, if you get
2001:250:ffff:8000:e6f4:feff:fe00:1122:3344/64
, the prefix is
2001:250:ffff:8000::/64
.
You can add any hexadecimal characters as your subnet address, for example
2001:250:ffff:8000:2333:dead:beef::/112
.
Note: Please remember your subnet prefix and prefix length, as you will use them from time
to time later.
Summary of Contents for RX4-1800
Page 1: ......
