JCP3-N01 Control Panel - NVG
Installation and Operating Manual
Rev A
Page 10
(6)
Music/Configuration Connector Cover (
♫
/io)
This is a music input that is compatible with most music players.
It accepts a 3 pole 3.5mm stereo plug with a slim diameter
connector housing.
(This connector is also used during installation to change
configuration settings for the JRAC-001.)
The port (
♫
/io) is protected by a urethane rubber cover, which can be
lifted upwards or rotated round (as shown) to provide access to the
port.
♫
♫
/io port
Port cover
CAUTION
:
If an unapproved connector or cable is used, damage to the unit or to any attached device may
occur. If in doubt, contact JAC for a list of approved cables, music sources and devices.
(7)
Transmit Annunciator - TX
This is a deadfront annunciator that will illuminate
when the JRAC-001 is transmitting.
The default legend is ‘TX’, but it is interchangeable
to allow customization.
(8)
Transmit Selector
This is a rotary six-position control that is used to
select transmission via one of the six transceivers.
Each of the transmit selector positions is linked by a
white line to the corresponding transmit select
annunciator, transceiver switch and legend.
The appropriate annunciator will light green to show
which transceiver is selected for transmit - ‘COM4’ in
this example.
