THE CONTROLS
In this fully integrated appliance the controls are located
on the top of the door. When selecting a programme,
the door needs to be partially opened.
Audible signals have been introduced to help indicate
which operations the dishwasher is performing.
Short «instruction accepted» signal
When any of the buttons are pressed: a short audible
signal informs you that the machine has accepted the
instruction given.
Long «programme run» signal
A continuous audible signal lasting about one second,
heard only when you close the dishwasher door,
informs you that the washing programme is starting.
Intermittent «end of programme» signal
An intermittent audible signal, lasting in total five sec-
onds, informs you that the wash programme has end-
ed. If you wish to deactivate these audible signals,
press both the
65° and
55° programme buttons
together for about 3 seconds, until the intermittent au-
dible signal can no longer be heard.
To reactivate the audible signals, press both buttons
together again for about 3 seconds, until an intermit-
tent audible signal is heard.
1. ON/OFF Pushbutton
Depress this pushbutton to switch the dishwasher on.
The ON/OFF indicator light (3) illuminates indicating
that the washing programme can be selected and
started. Depress again this button to switch the appli-
ance off.
2. Salt Refill Indicator Light
This light illuminates when the salt container needs
refilling. This light will remain on in a soft water area
where salt is not required.
3. ON/OFF Indicator Light
This illuminates when the ON/OFF button (1 ) is
depressed, indicating that the machine is on.
4. Programme Selector Buttons
Depress the button corresponding to the desired
washing programme (see washing programme chart).
5 End of Cycle Indicator Light
This light flashes when the programme has finished.
To switch it off depress the ON/OFF pushbutton (1).
USE
PPC05GB
50
1
2 3
4
5
Control panel
SO111
ENGLISH
