JUNO JSI 6961 Instruction Booklet Download Page 18

PII10GB

70

Once the correct position
has been found, open the
door and fasten the decor
panel on the lower section
by means of the two long 4
x 40 screws provided, using
the holes through the inner
door (see fig.).

Securing under a counter

Open the door; vertically in-
sert the two mounting
brackets (A) on the front
part of the dishwasher and
turn them 90° (see fig.).
Secure the brackets to the
counter by means of two
3.5 x16 screws provided. 

Important!

The dishwasher must be secured against tilting.
Therefore, make sure that the counter it is fitted un-
der, is suitably secured to a fixed structure (adjacent
kitchen cabinets, wall). 

Attention! 

When the dishwasher is secured to the kitchen
cabinets, do not drill any holes into the sides of
the machine. 

Adjusting the door balance

The door of the dishwasher is balanced when it is
open in any position.

Fitting the decor panel 
may sometimes affect this
balance. In this case it will
be necessary to adjust the
balance as follows:
Half-open the door and 
regulate the screws located
on the kick plate.

By screwing or unscrewing these screws, the tension
of the door balancing springs is increased or 
decreased respectively.

Attention!

The weight of the panel should be within the limits 
given in the "dimensions of the panel", otherwise 
balancing the door will not be possible.

Levelling

Make sure that the dishwasher door closes properly,
without rubbing on sides. Otherwise level the machine
by slightly screwing or unscrewing the two front feet
until perfect closure of the door is reached. 

Kitchen plinth adjustment

To allow correct opening of
the door it is sometimes
necessary to cut the
kitchen plinth. Refer to the
cutting table below. 

According to dimensions of
(a) and (b) as shown on
the figure, you will find on
the following table the
depth (x) of the cut to be
made on the plinth. 

The dimensions (a) and (b) of the table are those
more frequently used in the kitchen furnitures. 

1

2

A

90

°

II18

A

II40

a

b

II15

II08

II10

1 7 0 1 6 0 1 5 0 1 4 0 1 3 0 1 2 0 11 0 1 0 0

136 131 125 118 110 100 93 85

135 131 125 118 110 102 92 85

137 132 125 118 110 102 94 85

138 134 128 120 110 104 95 85

139 130 124 115 105 98 88

138 129 120 110 100 90

135 125 115 105 95

/

/

/

/

40

50

60

70

80

90

1 0 0

/

/

Height (a)*

Depth (

b

)*

X

X

600 mm

minimum

Dimensions of the 

cut-out in plinth

(*) mm

ENGLISH

Summary of Contents for JSI 6961





















Reviews: