JUNO JKU2048 Operating Instructions Manual Download Page 3

Instructions for the use of the instructions booklet

Notes which are important for your safety or for the proper functioning of the appliance

Supplementary information regarding operation and practical applications of the appliance.

Tips and notes concerning economical and environmentally sound use of the appliance

Disposal

Appliance Packaging Information

¥ The materials used on this appliance marked with the symbol 

are recyclable.

>PE<

=polyethylene

>PS<

=polystyrene

>PP<

=polypropylene

All materials are environmentally sound! 

Disposal of old Appliances

Information concerning collection schedules or locations can be obtained from your local Council or
Environmental Health Office.

Use and Control

Before Use

Wait two hours before connecting the
appliance to allow the oil to flow back in the
compressor.

¥ Before using the appliance for the first time, wash

the interior and all internal accessories with
lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product,
then dry thoroughly.

Do not use detergents or abrasive
powders, as these will damage the finish.

¥ Remove safety elements used for transportation.

Starting the appliance

¥ Insert the plug into the wall socket and turn the

thermostat knob clockwise beyond position ÇOÈ
(OFF).

¥ Turn the thermostat control to the required setting.

Temperature Control

¥ The thermostat control situated inside the fridge

compartment regulates the temperature of the
appliance.

¥ It allows you to adjust the temperature inside the

refrigerator according to use and external
conditions.
¥ 

Setting ã1Ò

= hightest temperature, warmest 

setting

¥ 

Setting ã6Ò

= lowest temperature, coldest 

setting.

¥ 

Setting ã0Ò

= Off

A medium setting is generally the most suitable.

Internal Parts

Storage shelves

¥ The shelves can be removed for cleaning.

¥ To permit storage of food packages of various

sizes, the shelves can be placed at different
heights.

¥ To remove the internal shelf pull forward until it can

be tipped up or down and removed.

¥ Please do the same in reverse to insert the shelf at

a different height.

11

Summary of Contents for JKU2048











Reviews: