the level number. After reaching level
10, the count starts again from level 1.
3. To confirm the setting, turn the
programme knob until the programme
marker is again in the on/off position
The rinse aid empty notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot rinse
phase.
When the rinse aid chamber is empty, the
rinse aid indicator is turned on notifying to
refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the notification
for refilling rinse aid. However, for best
drying performance, always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
The appliance must be in programme
selection mode.
Make sure that the programme marker on
the knob is set to the on/off position.
1. To enter the user mode, press and
hold
. At the same time turn the
knob counterclockwise until the
programme marker indicates the first
programme. Release
when the
indicators and on/off start flashing.
2. Turn the knob counterclockwise until
the programme marker indicates the
second programme.
The indicator shows the current
setting:
•
is on = the rinse aid empty
notification is activated.
•
is off = the rinse aid empty
notification is deactivated.
3. Press
to change the setting.
4. To confirm the setting, keep turning
the programme knob until the
programme marker is back in the
on/off position.
AirDry
AirDry improves the drying results. The
appliance door opens automatically during
the drying phase and remains ajar.
AirDry is automatically activated with all
programmes other than (if applicable).
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
CAUTION! If children have
access to the appliance, we
advise to deactivate AirDry.
The automatic opening of the
door may pose a danger.
How to deactivate AirDry
The appliance must be in programme
selection mode.
Make sure that the programme marker on
the knob is set to the on/off position.
1. To enter the user mode, press and
hold
. At the same time turn the
knob counterclockwise until the
programme marker indicates the first
programme. Release
when the
indicators and on/off start flashing.
35
