JUNO JDK7090G, Instruction Booklet, Page: 8 / 14

13
2 - Replacement
Remove the exhaust grill, remove the active carbon filters at the ends of the diffuser by
turning them in the direction of the
A arrows. Replace with new filters, turning them in the
direction of the B arrows ( fig. 16 ), replace the exhaust grill.
3.4 - Illumination
Illumination can be with a 15 W neon tube or 2 40 W bulbs. For replacement, proceed as
follows (
fig. 17 ):
a) Remove the metal terminals T . The glass will stay hooked to tabs Z .
b) Slide the glass to one side until the opposite end is free (arrow 1), then pull gently down
(arrow 2), then slide in the opposite direction (arrow 3) until the glass is freed. Replace the
bulb or neon tube and replace the glass, reversing the removal sequence.
3.5 - Cleaning
For normal hood cleaning:
- Do not use wet cloths or sponges, or jets of water.
- Do not use solvents or alcohol, which could damage painted surfaces.
- Do not use abrasive substances, especially on stainless steel surfaces.
It is advisable to use a damp cloth and a mild liquid detergent.
Part 2 - OPERATION AND MAINTENANCE INSTRUCTIONS