Junker JI36GT50, User Manual

Page: 44 / 48

44
Time programming function
This function may be used in two different ways:
■
to automatically switch off a hotplate.
■
as a timer.
Switching a hotplate off automatically
Enter the cooking time for the desired hotplate. The hotplate will
switch off automatically once this time has elapsed.
How to program
1.
Select the cooking power required.
2.
Press the
0
symbol. The
x
indicator lights up on the
selected hotplate. In the time program function display
‹‹
appears. To select another hotplate, press the 0 symbol
several times, until the
x
indicator of the required hotplate
lights up.
3.
Press the
+
or
-
symbol on the time program function. The
basic setting appears:
+
symbol: 30 minutes.
-
symbol: 10 minutes.
4.
Press the
+
or
-
symbol until the required cooking time
appears.
After a few seconds, the cooking time will start to count down.
Once the time has elapsed
The hotplate switches off. The warning signal sounds, and the
in the time program function visual display
‹‹
appears for 10
seconds. The
x
indicator lights up on the hotplate display.
Pressing the
0
symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the 0 symbol several times until the required x
indicator lights up. Change the cooking time using the
+
or
-
symbols, or set to
‹‹
.
Notes
■
If a cooking time has been programmed in several zones, it
can be set to display all time values. To do this, press the
0
symbol several times until the
x
indicator for the required
hotplate lights up.
■
Cooking times of up to 99 minutes can be programmed.
Automatic timer
With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the
0
symbol several times until the required
x
indicator lights up. Change the cooking time using the + or -
symbols, or set to ‹‹ .
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1.
Press the
0
symbol several times until the
W
indicator lights
up.
‹‹
appears in the time program function display.
2.
Press the
+
or
-
symbol on the time program function. The
basic setting will appear.
+
symbol: 10 minutes.
-
symbol: 05 minutes.
3.
Set the time required using the
+
or
-
symbols.
After a few seconds, the timer will start to count down.
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
is shown, and the
W
indicator comes on. After 10 seconds
the indicators turn off.
Pressing the
0 symbol turns off the indicators and stops the
beep.
Changing or cancelling the time
Press the
0
symbol several times until the
W
indicator lights
up. Change the cooking time or set to ‹‹ with the symbols
+
or
-
,
Cleaning protection
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning protection
function. Press the
R
symbol. An audible signal sounds. The
control panel is locked for 35 seconds. The surface of the
control panel can now be cleaned without risk of changing the
settings.
Note:
The lock does not affect the main switch. The hob may
be switched off when desired.