Juniper XRE200 -, Hardware Manual

Page: 149 / 188

Laser and LED Safety Guidelines and Warnings
IN THIS SECTION
General Laser Safety Guidelines | 149
Class 1 Laser Product Warning | 150
Class 1 LED Product Warning | 151
Laser Beam Warning | 152
Juniper Networks devices are equipped with laser transmitters, which are considered a Class 1 Laser
Product by the U.S. Food and Drug Administration and are evaluated as a Class 1 Laser Product per EN
60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following safety guidelines to
prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser radiation. The
lens in the human eye focuses all the laser power on the retina, so focusing the eye
directly on a laser source—even a low-power laser—could permanently damage the
eye.
Avertissement Les connecteurs à fibre optique sans terminaison peuvent émettre
un rayonnement laser invisible. Le cristallin de l’œil humain faisant converger toute
la puissance du laser sur la rétine, toute focalisation directe de l’œil sur une source
laser, —même de faible puissance—, peut entraîner des lésions oculaires irréversibles.
149