background image

 

- ii - 

 

 

Proprietary Notice 

 
Information in this document is confidential and proprietary to Telchemy, Incorporated. Access to and use of this information is 
limited strictly to licensees of Telchemy, Incorporated and is subject to the terms of a separate and appropriate written license 
agreement between the Licensee and Telchemy. The information in this document may be protected by granted or pending patents. 
 
In addition, the information in this document is subject to change without notice and does not represent a commitment on the part of 
Telchemy, Incorporated. The software described in this document may be used only in accordance with the terms of the license 
agreement. It is against the law to copy the software on any medium except as specifically allowed in the license or non-disclosure 
agreement. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, 
including photocopying, recording, or information storage and retrieval systems, for any purpose other than the licensee’s personal 
use without express written permission of Telchemy, Incorporated. 
 
All specifics of the product, its use and implementation contained in this document are provided in good faith. However, all 
warranties, implied or expressed, including but not limited to implied warranties of merchantability or fitness for a particular purpose 
are excluded. 
 
This document is intended solely to assist the Licensee in the use of the Telchemy Licensed Software Product and for no other 
purpose. Telchemy shall not be liable, in any way under any theory of law, for any loss or damage of any kind what so ever, arising 
from the use of any of the information contained in this manual, or any error or omission in the information, or any incorrect use of 
the Software Product. 
 
Copyright © 2010 Telchemy, Incorporated. All rights reserved. 
 
Telchemy, DVQattest, VQmon, and the Telchemy logo are registered trademarks of Telchemy, Incorporated. 

TePM and the VQmon Quality Assured logo are trademarks of Telchemy, Incorporated. 

Juniper Networks and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries.  
 
 

Summary of Contents for TePM Agent










Reviews: