Juniper TCX1000-RDM20, Hardware Manual

Page: 161 / 206

Packing a TCX1000-RDM20 for Shipping
To pack a TCX1000-RDM20 for shipping:
1.
Power off the TCX1000-RDM20 and remove the power cables. See “Powering Off a
TCX1000-RDM20” on page 129 .
2.
Remove the cables that connect the TCX1000-RDM20 to all external devices. See
“Disconnecting a Fiber-Optic Cable from a TCX1000 Device” on page 125 .
3.
Remove all field-replaceable units (FRUs) from the device. See:
• Removing a Fan Module from a TCX1000-RDM20 on page 117
•
Removing a Power Supply from a TCX1000-RDM20 on page 121
4.
Remove the TCX1000-RDM20 from the rack or cabinet. See “Removing a
TCX1000-RDM20 from a Rack or Cabinet” on page 130 .
5.
Return accessories or FRUs with the TCX1000-RDM20, by packing them as instructed
in
“Packing a TCX1000-RDM20 Chassis or Component for Shipping” on page 146 .
6.
Place the TCX1000-RDM20 in an antistatic bag.
7.
Place the TCX1000-RDM20 in the shipping carton.
8.
Place the packing foam on top of and around the TCX1000-RDM20.
9.
Close the top of the cardboard shipping box and seal it with packing tape.
10.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking. See
“Returning a Hardware Component to Juniper Networks,
Inc.” on page 145 for instructions on obtaining an RMA number.
Packing TCX1000-RDM20 Components for Shipping
CAUTION: Do not stack TCX1000-RDM20 components. Return individual
components in separate boxes if they do not fit together on one level in the
shipping box.
To pack and ship TCX1000-RDM20 components:
1.
Place individual FRUs in antistatic bags.
2.
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
147 Copyright © 2019, Juniper Networks, Inc.
Chapter 26: Packing and Returning Components