Juniper SSR130, Hardware Manual

Page: 86 / 88

In Case of Electrical Accident
AC Power Electrical Safety Guidelines
AC Power Electrical Safety Guidelines
The following electrical safety guidelines apply to AC-powered devices:
•
Note the following warnings printed on the device:
“CAUTION: THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT ALL POWER
SUPPLY CORDS BEFORE SERVICING TO AVOID ELECTRIC SHOCK.”
“ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. AFIN DE
PRÉVENIR LES CHOCS ÉLECTRIQUES, DÉBRANCHER TOUT CORDON D'ALIMENTATION AVANT
DE FAIRE LE DÉPANNAGE.”
•
AC-powered devices are shipped with a three-wire electrical cord with a grounding-type plug that fits
only a grounding-type power outlet. Do not circumvent this safety feature. Equipment grounding must
comply with local and national electrical codes.
•
You must provide an external certified 2-pole circuit breaker rated minimum 20 A for United States
(16-20 A for other countries) in the building installation. Install as permitted by the local code.
•
The power cord serves as the main disconnecting device for the AC-powered device. The socket outlet
must be near the AC-powered device and be easily accessible.
•
For devices that have more than one power supply connection, you must ensure that all power
connections are fully disconnected so that power to the device is completely removed to prevent electric
shock. To disconnect power, unplug all power cords (one for each power supply).
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
86