Juniper SRX4100, Hardware Manual

Page: 46 / 134

AC Power Cord Specifications for the SRX4100 Services Gateway
A detachable AC power cord is supplied with the AC power supplies. The coupler is type
C13 as described by International Electrotechnical Commission (IEC) standard 60320.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical code
(NEC) Section 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3).
Table 19 on page 30 provides power cord specifications, and Figure 12 on page 30 depicts
the plug on the AC power cord provided for each country or region.
Table 19: AC Power Cord Specifications
Plug Standards Electrical Specification Country
AS/NZ 3112-1993 250 VAC, 10 A, 50 Hz Australia
GB2099.1 1996 and
GB 1002 1996
(CH1-10P) 250 VAC, 10 A, 50 Hz China
CEE (7) VII 250 VAC, 10 A, 50 Hz Europe (except Italy and United Kingdom)
CEI 23-16/VII 250 VAC, 10 A, 50 Hz Italy
JIS 8303 125 VAC, 12 A, 50 or 60 Hz Japan
NEMA 5-15 125 VAC, 10 A, 60 Hz North America
BS 1363A 250 VAC, 10 A, 50 Hz United Kingdom
Figure 12: AC Plug Types
NOTE: Power cords and cables must not block access to services gateway
components or drape where people might trip on them.
CAUTION: The AC power cord for the services gateway is intended for use
with the services gateway only and not for any other use.
Copyright © 2017, Juniper Networks, Inc. 30
SRX4100 Services Gateway Hardware Guide