Juniper SRX320 Hardware Manual Download Page 85

Page: 85 / 154

WARNING:

Do not press the Power button while the device is shutting down.

CAUTION:

Forced shutdown can result in data loss and corruption of the file

system.

NOTE:

To remove power completely from the device, unplug the power cord

or switch off the AC power source.

After powering off a power supply, wait at least 10 seconds before turning it
back on. After powering on a power supply, wait at least 10 seconds before
turning it off.

The power button on the services gateway is a standby power switch, which
will not turn off the input power to the services gateway.

TIP:

When you are powering off the device, the CLI displays the following

message:

Turning the system power off

. You can now safely remove the power

cable to completely power off the device.

NOTE:

You can use the

request system reboot

CLI command to schedule a

reboot.

Documentation

•

Understanding the SRX320 Services Gateway Power Supply on page 15

•

Powering On the SRX320 Services Gateway on page 68

Chapter 17: Providing Power to the SRX320 Services Gateway

Summary of Contents for SRX320





























































































































Search results

Summary of Contents for SRX320

Reviews:

Brands by name

Popular brands

Juniper SRX320, Hardware Manual

Search results

Summary of Contents for SRX320

Reviews:

Brands by name

Popular brands