Juniper SRX240 Series Hardware Manual Download Page 36

Page: 36 / 198

SRX240 Services Gateway LEDs

This topic includes the following sections:

•

Front Panel LEDs on page 18

•

Ethernet Port LEDs on page 20

•

DC Power Supply Feed LEDs (SRX240 Services Gateway DC Power Supply
Model) on page 21

Front Panel LEDs

Figure 5 on page 18

shows the SRX240 Services Gateway front panel LEDs.

Figure 5: SRX240 Services Gateway Front Panel LEDs

g037521

Table 10 on page 18

lists the LED indicators on the SRX240 Services Gateway front panel.

Table 10: SRX240 Services Gateway Front Panel Components

Usage

Description

Component

The Status LED can be used to
determine whether the device is
starting up, is functioning normally,
or has failed.

The Status LED has the following
indicator colors:

•

Green and steadily on indicates
that the device is functioning
normally.

•

Amber and steadily on indicates
that the device is starting up.

•

Red and steadily on indicates that
the device has failed.

Status LED

SRX240 Services Gateway Hardware Guide

Summary of Contents for SRX240 Series










































































































































































Search results

Summary of Contents for SRX240 Series

Reviews:

Related manuals for SRX240 Series

Brands by name

Popular brands

Juniper SRX240 Series, Hardware Manual

Search results

Summary of Contents for SRX240 Series

Reviews:

Related manuals for SRX240 Series

Brands by name

Popular brands