11.
Replace the accessory box on top of the packing foam.
12.
Securely tape the box closed.
13.
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
Packing the Components for Shipment
Follow these guidelines for packing and shipping individual components of the services
gateway:
•
When you return a component, make sure that it is adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
box.
•
Use the original shipping materials if they are available.
•
Place individual Mini-PIMs in electrostatic bags.
•
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
CAUTION:
Do not stack any of the services gateway components during
packing.
Related
Documentation
•
Required Tools and Parts for Installing and Maintaining the SRX220 Services Gateway
on page 46
•
Locating the SRX220 Services Gateway Serial Number and Agency Labels on page 118
•
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 120
•
Return Procedure for the SRX220 Services Gateway on page 118
•
Contacting Customer Support on page 117
Copyright © 2016, Juniper Networks, Inc.
122
SRX220 Services Gateway Hardware Guide for H Model Numbers
